MicroBCU
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
| MicroBCU | |
|---|---|
| Developer | Eugen Burkowski |
| Status | released |
| Microcontroller/Board | universal |
Description
A little Bus Coupler Unit with an UART interface
Hardware
- IC: NCN5120
- Size: 23 x 19 x 5.4 (10.3) mm
- Voltage 1: 3.3V
- Voltage 2 (optinal): 5V (default), can be changed: 3.3V - 21V
- Max. current: up to 100mA
- UART: 19200bps 8E1
User Documentation
the new version (R1.2) has to connectors:
- 7x pin 2.54mm THT
- 2x4 or 2x5 pin 1.27 SMD
Attention: MicroBCU has no dedicated pins for WAGO terminal (Red/Grey)!
Developer Documentation
Build It
If you solder the MicroBCU yourself, be carefull: On (some?) PCV Rev 1.2 the solder print on the top (NCN-) side is wrong. The two capacitors C5 and C6 in the top right corner are switched - here you can see the correct soldering:
https://github.com/KONNEKTING/KonnektingHardware/blob/master/MicroBCU/R1.2/Board_top.pdf
Also be carefull wenn soldering the big capacitor C2: The solder print marks the + side of the capacitor, because this is the standard for tantalum capacitors. If you use aluminium capacitors, the - side is marked.