View source for FOTB - Firmware Over The Bus

See: https://github.com/arduino/ArduinoCore-samd/pull/220

Steps:

Get SDUBoot.ino from https://github.com/arduino/ArduinoCore-samd/tree/master/libraries/SDU/extras/SDUBoot. Use this as starting point for an own version, let's say we name our version "MyBoot"

So we will have

 MyBoot\
 MyBoot\EFUBoot.ino

and we also need

 MyBoot\boot
 MyBoot\build.sh

build.sh should contain something like this:

<syntaxhighlight lang=bash line>
#!/bin/sh -x

ARDUINO=$ARDUINO_HOME/arduino
SKETCH_NAME="MyBoot.ino"
SKETCH="$PWD/$SKETCH_NAME"
BUILD_PATH="$PWD/build"
OUTPUT_PATH="./boot"

if [[ "$OSTYPE" == "darwin"* ]]; then
	ARDUINO="/Applications/Arduino.app/Contents/MacOS/Arduino"
fi

buildSDUBootSketch() {
	BOARD=$1
	DESTINATION=$2

	$ARDUINO --verify --board $BOARD --preserve-temp-files --pref build.path="$BUILD_PATH" $SKETCH
	cat "$BUILD_PATH/$SKETCH_NAME.bin" | xxd -i > $DESTINATION
	rm -rf "$BUILD_PATH"
}

mkdir -p "$OUTPUT_PATH"

buildSDUBootSketch "arduino:samd:arduino_zero_edbg" "$OUTPUT_PATH/zero.h"
</syntaxhighlight>

Make it executable with help of 

 chmod g+x build.sh

And finally run it with

 ./build.sh

After that, you have a .h file in your boot-folder.

Copy/paste SDU.cpp/SDU.h and let them point to the .h file you just created.

Write your sketch and include your version of SDU.h/SDU.cpp with "#include".
Upload your sketch as usual.

If you now apply you update according to your own SDUBoot variant and reboot your arduino, the new sketch is applied to main memory and arduino starts up with the new sketch.