View source for EDS-WS433.01 Weatherstation for 433Mhz Sensors

{| class="wikitable" style="float:right;margin-left: 15px;margin-top: 15px; margin-bottom: 15px;"
! colspan="2"|Weatherstation for 433Mhz Sensors
|-
! colspan="2"|[[File:EDS-WS433.01 HW001.jpg|300px|thumb|center]]
|-
! Developer
| [http://wiki.konnekting.de/index.php/User:SirSydom SirSydom]
|-
! Phase
| Developement completed
|-
! µC-Board
| [https://wiki.konnekting.de/index.php/Recommended_Arduino_Boards#Adafruit_ItsyBitsy_M0_Express ItsyBitsy M0 Express]
|-
! µC
| SAMD21G18
|-
! KNX
| [[MicroBCU]]
|-
! Manufacturer/Device ID
| 7337 / 30
|-
! Repository
| [https://github.com/SirSydom/konnekting_weatherstation_433MHz_interface On GitHub]
|}


== Short Description ==
This device will read weather data from Wireless Sensors like Ventus W132 and W174 which can bought as spare part.
Supported Data:
W132:
*Temperature
*relative Humidity
*Wind Direction
*Wind Speed (Average)
*Wind Speed (Gust)
W174:
*Rain Gauge

[[File:EDS WS433 W132 W174 Sensors.jpg]]

== Software ==
*xml: [https://github.com/SirSydom/konnekting_weatherstation_433MHz_interface/blob/d68ed9964b8512936095f31ea1ca95bce0cdd088/software/EDS-WS433.01/EDS-WS433.01.kdevice.xml EDS-WS433.01.kdevice.xml]

*FW [https://github.com/SirSydom/konnekting_weatherstation_433MHz_interface/releases/tag/FW_V00.10 V00.10]

I plan to update the FW as soon there is a Konnekting Device Library V1.0.0 released, supporting [[FOTB - Firmware Over The Bus]]


== Hardware ==

*ItsyBitsyM0 Arduino Board
*µBCU
*RXB6 433MHz Superheterodyne Receiver
*Spiral antenna


== User Doc ==


== Dev Doc ==
See [https://github.com/SirSydom/konnekting_weatherstation_433MHz_interface/tree/master/dev_doc GitHub]


== Build It ==



== Links ==

[https://knx-user-forum.de/forum/projektforen/konnekting/1398577-konnekting-wetterstation-besser-konnekting-knx-interface-f%C3%BCr-ventus-wetterstationen KNXUF Thread]



[[Category:Device/Kits]]