Difference between revisions of "KONNEKTING Protocol Specification"
Jump to navigation
Jump to search
Konnekting (talk | contribs) |
Konnekting (talk | contribs) |
||
| Line 29: | Line 29: | ||
== Glossary == | == Glossary == | ||
| − | * '''LO''' low byte, | + | * '''LO''' low byte, b[0] of 2-byte-array (little endian byte order) |
| − | * '''HI''' high byte, | + | * '''HI''' high byte, b[1] of 2-byte-array (little endian byte order) |
* '''GA''' group address, 1/2/3 | * '''GA''' group address, 1/2/3 | ||
* '''IA''' or '''individual address''' aka. PA or physical address, 1.2.3 | * '''IA''' or '''individual address''' aka. PA or physical address, 1.2.3 | ||
Revision as of 06:18, 2 August 2018
The programming protocol uses group telegrams with the mostly unused group address 15/7/255. Those telegrams use DPT 60000.000, which is reserved for manufacturer specific custom extensions. The used Property Data Type is PDT_GENERIC_14, which is 14 bytes of raw data.
!!! It's required that no other device is using this address. Otherwise it may conflict with KONNEKTING Devices and programming your devices may fail !!!
| Byte no#: | 0 | 1 | 2 | ... | 13 |
|---|---|---|---|---|---|
| Used for: | Header, 2 bytes | Body, 12 Bytes | |||
| Description: | Protocolversion | Message-Type-ID | depends on Message-Type-ID | ||
| Range: | 0x00..0xFF | 0x00..0xFF | |||
There are several message types for all kind of purposes. As we have one byte for the Message-Type-ID, we have up to 256 possible messages. That should be enough for our purposes. Same for version: Up to 256 versions should be enough for the near future.
Glossary
- LO low byte, b[0] of 2-byte-array (little endian byte order)
- HI high byte, b[1] of 2-byte-array (little endian byte order)
- GA group address, 1/2/3
- IA or individual address aka. PA or physical address, 1.2.3
Protocol Versions
Here is a list of currently developed protocol versions