Difference between revisions of "DB2.1 1.0"

Latest revision as of 19:55, 27 March 2018

DB2.1 v1.0 - 2 Button Doorbell
no image yet
Developer	Alexander Christian
Status	In Development
Microcontroller/Board	M0dularis+
KNX connectivity	MicroBCU

Description

PCB replacement for 2n Entrycom IP Uni doorbell. It will have 2 buttons with RGB background LED light and a speaker for PCM WAVE playback.

Hardware

M0dularis+ is used as base-controller.

		Description	Pin		Description
		GND / KNX GND	1	2	GND from 24V Input
	SJ: 3.3V	VCC	3	4	24V from 24V Input
	PA22/SDA	SDA / IO0	5	6	IO3	SJ: PA02/A0	PCM Audio Output via DAC on A0
	PA23/SCL	SCL / IO1	7	8	ExtINT Application / IO2	SJ: PA18/D10*#	ReedRelay Speaker Enable
PWM R on LED1	PA09/D3*#	Option0	9	10	Option7	PA17/D13*#	PWM R on LED2
PWM G on LED1	PA08/D4*	Option1	11	12	Option6	PA16/D11*#	PWM G on LED2
PWM B on LED1	PA15/D5*#	Option2	13	14	Option5	PA20/D6*#	PWM B on LED2
Button 1	PA14/D2#	Option3	15	16	Option4	PA21/D7#	Button 2

Solder-Jumper (SJ) configuration:

IO3: SJ to A0
IO2: SJ to D10
Application connector: SJ to 3.3V
Frontend connector: SJ to 3.3V (but is unused)
I2C (on IO0/IO1): PullUp

* = PWM capable
# = INT capable

24V from yellow/white bus connector -> LM2596 step-down buck converter module -> 5V supply voltage for amplifier + LEDs

Software

The software enabled the user to fully have control over the buttons. One idea ist to have multiple states for the buttons. For instance

Default (white background light): Rings the bell
Postman (yellow background light): Ringing the bell will playback a wave file, telling where he can put the package that you are waiting for. Additional things can be triggered by calling a KNX GroupAddress, f.i. open the garage door half a meter so safely store the package.
...

Open Questions

how to get files onto the SPI flash?!

-> see filetransfer via Bus PoC

User Documentation

Developer Documentation

Build It

Links

@@ Line 1: / Line 1: @@
 {| class="wikitable" style="float:right;margin-left: 15px;margin-top: 15px; margin-bottom: 15px;"
-! colspan="2"|DB2.1 v1.0- 2 Button Doorbell
+! colspan="2"|DB2.1 v1.0 - 2 Button Doorbell
 |-
-! colspan="2"|[[File:DB2.1_1.0.jpg|300px|thumb|center]]
+! colspan="2"|no image yet
 |-
 ! Developer
@@ Line 25: / Line 25: @@
 == Hardware ==
 [[M0dularis+]] is used as base-controller.
+{| border="1" style="text-align:center; border-collapse:collapse"
+! scope="col"|
+! scope="col"|
+! scope="col"|
+! scope="col"|
+! scope="col"|Description
+! scope="col" colspan="2"|Pin
+! scope="col"|Description
+! scope="col"|
+! scope="col"|
+! scope="col"|
+! scope="col"|
+|-
+|
+|
+|
+|
+| style="background-color: grey;"|GND / KNX GND
+|1
+|2
+| style="background-color: grey;"|GND from 24V Input
+|
+|
+|
+|
+|-
+|
+|
+|
+|SJ: 3.3V
+| style="background-color: red;"|VCC
+|3
+|4
+| style="background-color: indianred;"|24V from 24V Input
+|
+|
+|
+|
+|-
+|
+|
+|
+|PA22/SDA
+| style="background-color: yellow;"|SDA / IO0
+|5
+|6
+| style="background-color: limegreen;"|IO3
+|SJ: PA02/A0
+|PCM Audio Output via DAC on A0
+|
+|
+|-
+|
+|
+|
+|PA23/SCL
+| style="background-color: yellow;"|SCL / IO1
+|7
+|8
+| style="background-color: lightblue;"|ExtINT Application / IO2
+|SJ: PA18/D10*#
+|ReedRelay Speaker Enable
+|
+|
+|-
+|
+|
+|PWM R on LED1
+|PA09/D3*#
+| style="background-color: mediumseagreen;"|Option0
+|9
+|10
+| style="background-color: mediumseagreen;"|Option7
+|PA17/D13*#
+|PWM R on LED2
+|
+|
+|-
+|
+|
+|PWM G on LED1
+|PA08/D4*
+| style="background-color: mediumseagreen;"|Option1
+|11
+|12
+| style="background-color: mediumseagreen;"|Option6
+|PA16/D11*#
+|PWM G on LED2
+|
+|
+|-
+|
+|
+|PWM B on LED1
+|PA15/D5*#
+| style="background-color: mediumseagreen;"|Option2
+|13
+|14
+| style="background-color: mediumseagreen;"|Option5
+|PA20/D6*#
+|PWM B on LED2
+|
+|
+|-
+|
+|
+|Button 1
+|PA14/D2#
+| style="background-color: mediumseagreen;"|Option3
+|15
+|16
+| style="background-color: mediumseagreen;"|Option4
+|PA21/D7#
+|Button 2
+|
+|
+|}
+Solder-Jumper (SJ) configuration:
+* IO3: SJ to A0
+* IO2: SJ to D10
+* Application connector: SJ to 3.3V
+* Frontend connector: SJ to 3.3V (but is unused)
+* I2C (on IO0/IO1): PullUp
+''<nowiki>*</nowiki> = PWM capable''<br/>
+''<nowiki>#</nowiki> = INT capable''
+V from yellow/white bus connector -&gt; LM2596 step-down buck converter module -&gt; 5V supply voltage for amplifier + LEDs
 == Software ==
@@ Line 34: / Line 168: @@
 * Postman (yellow background light): Ringing the bell will playback a wave file, telling where he can put the package that you are waiting for. Additional things can be triggered by calling a KNX GroupAddress, f.i. open the garage door half a meter so safely store the package.
 * ...
+=== Open Questions ===
+* how to get files onto the SPI flash?!
+<nowiki>-&gt;</nowiki> see filetransfer via Bus PoC
 == User Documentation ==
@@ Line 43: / Line 182: @@
 == Links ==
-[https://zeropage.io/wav-dateien-von-sd-karte-mit-arduino-abspielen/ | WAV plaback from SD]
+* https://github.com/arduino-libraries/AudioZero
-[https://github.com/Marzogh/SPIFlash | SPI flash library]
+* https://github.com/PaulStoffregen/SerialFlash
 [[Category:Device/Kits]]