Difference between revisions of "16CH Binary Input"
Jump to navigation
Jump to search
| Line 39: | Line 39: | ||
== Hardware == | == Hardware == | ||
| − | + | === What you need === | |
for this device do you need: | for this device do you need: | ||
* 1x OKW Housing | * 1x OKW Housing | ||
Revision as of 12:17, 22 February 2018
| 16CH Binary Input | |
|---|---|
| Developer | Matthias F. |
| Status | Version 1.0 finished |
| Microcontroller/Board | |
| KNX connectivity | Mini-BCU |
Description
16ch Binary Input (potential-free)
The binary input has 16 inputs available and is used to connect eight conventional push-buttons or floating contacts such as window or relay contacts. There is one status LED for each input. In addition, the input status is sent to the bus. A separate power supply is not necessary
Technical Data:
- 16 Inputs (potential-free / floating contacts)
- wire length tested 30m (more possible)
- x-Inputs can configure to a "room" ("room"-GA can show if one of the windows is open in the room)
- Counting of pulses, suitable for 30ms S0 pulses (CH13 -CH16 can use for S0)
- The device makes a contact supply voltage (5V) which is not electrically isolated from the bus voltage!
Schematic
Hardware
What you need
for this device do you need:
- 1x OKW Housing
- 1x PCB Kit
- 1x Mounting Kit (screws, ...)
OKW Housing link OKW-Website:[1] 1x B6503121 RAILTEC B, 4 Module 3x B6607140 Klemmenabdeckung, flach 1x B6607145 Abdeckung KNX, flach 4x B6607142 Klemmenabdeckung, flach (1x) B6603180 Frontplatte, 4 Module (only if you don't use the "LED-Status-PCB"
PCB Kit:
1) Application PCB
2) Controller PCB
3) LED-Status PCB (for function not necessary, only to show the status of the Inputs)
4) Mini-BCU (KNX-Transceiver)
Mounting Kit 4x
