KONNEKTING Protocol Specification 0x01
Revision as of 20:27, 5 March 2018 by Konnekting (talk | contribs)
Message Types for Protocol-Version 0x01
--- DRAFT ---
This is the second protocol version.
--- DRAFT ---
0x00 Acknowledge
- Message Name: Acknowledge
- MsgID: 0 dec / 0x00 hex
- Description: Acknowledge a previous received WRITE message
- Requires Programming Mode: n/a
| Byte no# | Description |
|---|---|
| 2 | Acknowledge type: 0x00: ACK |
| 3 | Error-Code (only NACK): 0x00: no error / no error code available |
| 4..13 | 0x00, unused |
0x01 DeviceInfoRead
- Message Name: DeviceInfoRead
- MsgID: 1 dec / 0x01 hex
- Description: Initiates reading general device information
- Requires Programming Mode: no
| Byte no# | Description |
|---|---|
| 2 | IndividualAddress HI |
| 3 | IndividualAddress LO |
| 4..13 | 0x00, unused |
0x02 DeviceInfoResponse
- Message Name: DeviceInfoResponse
- MsgID: 2 dec / 0x02 hex
- Description: Response to a DeviceInfoRead message
- Requires Programming Mode: n/a
| Byte no# | Description |
|---|---|
| 2 | Manufacturer-ID HI |
| 3 | Manufacturer-ID LO |
| 4 | Device-ID |
| 5 | RevisionID |
| 6 | Device Flags Flag masks: |
| 7 | IndividualAddress HI |
| 8 | IndividualAddress LO |
| 9..13 | 0x00, unused |
0x09 Restart
- Message Name: Restart
- MsgID: 9 dec / 0x09 hex
- Description: Restart device (device reboot, no memory reset)
- Requires Programming Mode: no
| Byte no# | Description |
|---|---|
| 2 | IndividualAddress HI |
| 3 | IndividualAddress LO |
| 4..13 | 0x00, unused |
0x0A ProgrammingModeWrite
- Message Name: ProgrammingModeWrite
- MsgID: 10 dec / 0x0A hex
- Description: Sets/Unsets Programming-Mode for device with given individual address. Device will respond with a "Acknowledge" message.
- Requires Programming Mode: no
| Byte no# | Description |
|---|---|
| 2 | IndividualAddress HI |
| 3 | IndividualAddress LO |
| 4 | Mode: 0x00 = OFF |
| 5..13 | 0x00, unused |
0x0B ProgrammingModeRead
- Message Name: ProgrammingModeRead
- MsgID: 11 dec / 0x10 hex
- Description: Reads current programming mode of all listening devices. If more than one device is in programming-mode, you will get more then one AnswerProgrammingMode messages.
- Requires Programming Mode: no
| Byte no# | Description |
|---|---|
| 2..13 | 0x00, unused |
0x0C ProgrammingModeResponse
- Message Name: ProgrammingModeResponse
- MsgID: 12 dec / 0x11 hex
- Description: Response to ProgrammingModeRead message.
- Requires Programming Mode: n/a
| Byte no# | Description |
|---|---|
| 2 | IndividualAddress HI |
| 3 | IndividualAddress LO |
| 4..13 | 0x00, unused |
0x14 IndividualAddressWrite
- Message Name: IndividualAddressWrite
- MsgID: 20 dec / 0x14 hex
- Description: Writes the individual address the device should use. Device will respond with a "Acknowledge" message.
- Requires Programming Mode: yes
| Byte no# | Description |
|---|---|
| 2 | IndividualAddress HI |
| 3 | IndividualAddress LO |
| 4..13 | 0x00, unused |
0x15 IndividualAddressRead
- Message Name: IndividualAddressRead
- MsgID: 21 dec / 0x15 hex
- Description: Each device in programming mode will respond with its individual address
- Requires Programming Mode: yes
| Byte no# | Description |
|---|---|
| 2..13 | 0x00, unused |
0x16 IndividualAddressResponse
- Message Name: IndividualAddressResponse
- MsgID: 22 dec / 0x16 hex
- Description: Response to a IndividualAddressRead message with the device's individual address.
- Requires Programming Mode: n/a
| Byte no# | Description |
|---|---|
| 2 | IndividualAddress HI |
| 3 | IndividualAddress LO |
| 4..13 | 0x00, unused |
0x?? MemoryWrite
- Message Name: MemoryWrite
- MsgID: ?? dec / 0x?? hex
- Description: Write data to device memory
- Requires Programming Mode: yes
| Byte no# | Description |
|---|---|
| 2 | Count: Number of bytes to write to memory, starting at "Address" |
| 3 | Address HI |
| 4 | Address LO |
| 5..13 | 1..9 bytes of Data, depends on "Count". Remaining bytes: 0xFF |
0x?? MemoryRead
- Message Name: MemoryRead
- MsgID: ?? dec / 0x?? hex
- Description: Reads data from device memory
- Requires Programming Mode: yes
| Byte no# | Description |
|---|---|
| 2 | Count: Number of bytes to read from address |
| 3 | Address HI |
| 4 | Address LO |
| 5..13 | 0xFF, unused |
0x?? MemoryResponse
- Message Name: MemoryResponse
- MsgID: ?? dec / 0x?? hex
- Description: Response to MemoryRead
- Requires Programming Mode: yes
| Byte no# | Description |
|---|---|
| 2 | Count: Number of bytes that have been read from address |
| 3 | Address HI |
| 4 | Address LO |
| 5..13 | 1..9 bytes of Data, depends on "Count". Remaining bytes: 0xFF |