Difference between revisions of "Tiny-BCU"
Jump to navigation
Jump to search
Konnekting (talk | contribs) (Created page with "= Idea = * BCU without ready-to-use KNX Transceiver like OnSemi, Siemens or Elmos * Small µC that reads/writes the bits to KNX bus and * "emulates" a reduced KNX TPUART BCU...") |
Konnekting (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 4: | Line 4: | ||
* Small µC that reads/writes the bits to KNX bus and | * Small µC that reads/writes the bits to KNX bus and | ||
* "emulates" a reduced KNX TPUART BCU protocol | * "emulates" a reduced KNX TPUART BCU protocol | ||
| + | |||
| + | = Benefits = | ||
| + | |||
| + | * No dependency to onsemi & co: OnSemi had several times delivery difficulties; Elmos can not be ordered when you're private person, Siemens is not cheap | ||
| + | * better handling wrt. bus powered supply | ||
| + | * easier to build, due to no QFN package | ||
| + | * Parts typically all available at german distributeros/electronic shops | ||
| + | * possibly different and thus easier communication protocol (I2C?) | ||
| + | * possibly more cpu cycles for the sketch due to caching on TinyBCU controller?! | ||
| + | |||
| + | = Cons = | ||
| + | |||
| + | * not that tiny as MicroBCU due to more parts on PCB | ||
| + | * possibly not significant cheaper than traditional BCU | ||
= Requirements = | = Requirements = | ||
| − | * Transceiver-Part: something to read/write the bits physically from/to KNX bus | + | * Transceiver-Part: something to read/write the bits physically from/to KNX bus; simple analog circuit for extracting/inserting the bits from/to bus. |
| − | * Controller-Part: something that can interpret the bits from transceiver and make it BCU-style readable + write the bits of a telegram to the transceiver | + | * Controller-Part: something that can interpret the bits from transceiver-part and make it BCU-style readable + write the bits of a telegram to the transceiver-part |
* Supply-Part: voltage and current from bus: at least 3.3V and 5V with about >=50mA, without creating interferrences on the BUS | * Supply-Part: voltage and current from bus: at least 3.3V and 5V with about >=50mA, without creating interferrences on the BUS | ||
Latest revision as of 14:51, 16 March 2018
Idea
- BCU without ready-to-use KNX Transceiver like OnSemi, Siemens or Elmos
- Small µC that reads/writes the bits to KNX bus and
- "emulates" a reduced KNX TPUART BCU protocol
Benefits
- No dependency to onsemi & co: OnSemi had several times delivery difficulties; Elmos can not be ordered when you're private person, Siemens is not cheap
- better handling wrt. bus powered supply
- easier to build, due to no QFN package
- Parts typically all available at german distributeros/electronic shops
- possibly different and thus easier communication protocol (I2C?)
- possibly more cpu cycles for the sketch due to caching on TinyBCU controller?!
Cons
- not that tiny as MicroBCU due to more parts on PCB
- possibly not significant cheaper than traditional BCU
Requirements
- Transceiver-Part: something to read/write the bits physically from/to KNX bus; simple analog circuit for extracting/inserting the bits from/to bus.
- Controller-Part: something that can interpret the bits from transceiver-part and make it BCU-style readable + write the bits of a telegram to the transceiver-part
- Supply-Part: voltage and current from bus: at least 3.3V and 5V with about >=50mA, without creating interferrences on the BUS
Transceiver-Part
See: https://github.com/selfbus/hardware-incubation/tree/master/module/UPModule
Supply-Part
See: https://github.com/selfbus/hardware-incubation/tree/master/module/UPModule For instance one can also use the "Polulu" step-down modules to create 3.3V and 5V from up to 40V input. The are multiple candidates available, f.i. from TI
Controller-Part
Something like the Attiny85.
Features:
- Interrupt-Pin: https://hoeser-medien.de/2015/04/attiny85-interrupt-basierend-auf-pinchange-interrupt-library/
- UART via softserial
- ultra low power
- small and also in DIP available --> easy to solder. Even with socket one can remove the chip to program it.
Open questions: How to debug? Maybe develop with Arduino UNO and then port to attiny?
SW: See: https://github.com/selfbus/software-arm-lib/tree/master/sblib/inc/sblib/eib