Difference between revisions of "EnOcean Gateway"

From KONNEKTING Wiki
Jump to navigation Jump to search
 
(4 intermediate revisions by one other user not shown)
Line 2: Line 2:
 
! colspan="2"|EnOcean Gateway
 
! colspan="2"|EnOcean Gateway
 
|-
 
|-
−
! colspan="2"|[[File:EnOcean_Gateway_Case_close.jpg|300px|thumb|center]]
+
!|[[File:EnOcean_Gateway_Case_close.jpg|300px|thumb|center]] Version 1
 +
| [[File:EnOcean_Gateway_Case_close.jpg|300px|thumb|center]] Version 2
 
|-
 
|-
−
! colspan="2"|[[File:EnOcean Gateway Case open.jpg|300px|thumb|center]]
+
!|[[File:EnOcean Gateway Case open.jpg|300px|thumb|center]]
 +
| [[File:EnOcean Gateway Case open.jpg|300px|thumb|center]]
 
|-
 
|-
 
! Developer
 
! Developer
Line 20: Line 22:
 
! EnOcean Module
 
! EnOcean Module
 
| EnOceanPI
 
| EnOceanPI
 +
|-
 +
! Needed libraries
 +
| KONNEKTING Lib [https://github.com/KONNEKTING/KonnektingDeviceLibrary] <br/> Wire (part of Standard Arduino)
 
|}
 
|}
  
Line 28: Line 33:
  
 
== Software ==
 
== Software ==
 +
[https://github.com/KONNEKTING/Konnekting_EnOcean_Gateway GiitHub Source Code]
 +
 +
===Software Components===
 +
; KonnektingEnocean_V1.0.ino
 +
: "Operating System", maps together all components, here the set of devices is configured.
 +
; kdevice_KNX_EnOcean_Gateway.h
 +
: Derived from the Konnekting configuration XML this header-file defines the available-configuration elements
 +
; EEPROM.h
 +
: Basic input/output, to access the EEPROM storage that stores the configuration.
 +
; EnOcean.h / EnOcean.cpp
 +
: Core components, that are shared among the device-modules.
 +
 +
; [[EnOcean_Gateway Device Software Template | EnOceanDevice_EMPTY.h]]
 +
: Empty EnOcean device template, can be used as a source for copying, to create new Device modules for this Gateway. Feel free to join the development!
 +
; [[EnOcean_Gateway Device NodOn 2Ch | EnOceanDevice_NodOn_2Ch.h]]
 +
: Device Module to forward the [https://nodon.fr/en/nodon/enocean-relay-switch-2-channels/ actuators] states from EnOcean to KNX. To allow switching of the actuator from KNX it is neccessary to use a sender module.
 +
; [[EnOcean_Gateway Device RPS sender | EnOceanDevice_RPS_sender.h]]
 +
: Device Module that simulates a simple single EnOcean push-button. Can be used to switch EnOcean actuators. This module can be used independently from any actuator, it is working fire and forget.
 +
; [[EnOcean_Gateway Device RPS simple | EnOceanDevice_RPS_simple.h]]
 +
: Device Module that receives commands from EnOcean push-button devices with up to four rockers.
 +
 +
===Software structure===
 +
Each Device Module defines the Konnekting representation of a specific device-type. E.g. EnOceanDevice_RPS_simple.h is a module that reflects a standard push-button switches such as Eltako FT-55. If you have two switches, so two FT-55, you need two instances of that Device Module loaded in your Sketch.
 +
 +
Within the "operating system" the devices are registered as objects and within the setup-routine configured. The order of appearance within the setup-routine matters.
 +
 +
===How to build the software===
 +
Use Arduino with the libraries Wire and KonnektingDevice.
  
 +
== Supported EEP Profiles ==
 +
ETS* = Sonderversion die direkt in der ETS genutzt werden kann
 +
{| class="wikitable"
 +
! ID !! Profil !! Konnekting !! ETS* !! Beschreibung
 +
|-
 +
| 0 || F6-02-01 || x || x || Rocker Switch 2
 +
|-
 +
| 1 || F6-02-02 || x || x || Rocker Switch 2
 +
|-
 +
| 2 || F6-02-03 ||  || x ||
 +
|-
 +
| 3 || F6-02-04 ||  || x ||
 +
|-
 +
| 4 || F6-03-01 ||  || x ||
 +
|-
 +
| 5 || F6-03-02 ||  || x ||
 +
|-
 +
| 6 || F6-04-01 ||  ||  ||
 +
|-
 +
| 7 || F6-04-02 ||  ||  ||
 +
|-
 +
| 8 || F6-05-01 ||  ||  ||
 +
|-
 +
| 9 || F6-10-00 || x || x || Fenstergriff
 +
|-
 +
| 10 || F6-10-01 || x || x || Fenstergriff (ERP2)
 +
|-
 +
| 11 || D5-00-01 || x || x || Fensterkontakt
 +
|-
 +
| 12 || A5-02-01 ||  || x ||
 +
|-
 +
| 13 || A5-02-02 ||  || x ||
 +
|-
 +
| 14 || A5-02-03 ||  || x ||
 +
|-
 +
| 15 || A5-02-04 ||  || x ||
 +
|-
 +
| 16 || A5-02-05 ||  || x ||
 +
|-
 +
| 17 || A5-02-06 ||  || x ||
 +
|-
 +
| 18 || A5-02-07 ||  || x ||
 +
|-
 +
| 19 || A5-02-08 ||  || x ||
 +
|-
 +
| 20 || A5-02-09 ||  || x ||
 +
|-
 +
| 21 || A5-02-0A ||  || x ||
 +
|-
 +
| 22 || A5-02-0B ||  || x ||
 +
|-
 +
| 23 || A5-02-10 ||  || x ||
 +
|-
 +
| 24 || A5-02-11 ||  || x ||
 +
|-
 +
| 25 || A5-02-12 ||  || x ||
 +
|-
 +
| 26 || A5-02-13 ||  || x ||
 +
|-
 +
| 27 || A5-02-14 ||  || x ||
 +
|-
 +
| 28 || A5-02-15 ||  || x ||
 +
|-
 +
| 29 || A5-02-16 ||  || x ||
 +
|-
 +
| 30 || A5-02-17 ||  || x ||
 +
|-
 +
| 31 || A5-02-18 ||  || x ||
 +
|-
 +
| 32 || A5-02-19 ||  || x ||
 +
|-
 +
| 33 || A5-02-1A ||  || x ||
 +
|-
 +
| 34 || A5-02-1B ||  || x ||
 +
|-
 +
| 35 || A5-02-20 ||  || x ||
 +
|-
 +
| 36 || A5-02-30 ||  || x ||
 +
|-
 +
| 37 || A5-04-01 ||  || x ||
 +
|-
 +
| 38 || A5-04-02 ||  || x ||
 +
|-
 +
| 39 || A5-04-03 ||  || x ||
 +
|-
 +
| 40 || A5-05-01 ||  ||  ||
 +
|-
 +
| 41 || A5-06-01 ||  || x ||
 +
|-
 +
| 42 || A5-06-02 ||  || x ||
 +
|-
 +
| 43 || A5-06-03 ||  || x ||
 +
|-
 +
| 44 || A5-07-01 || x || x || PIR
 +
|-
 +
| 45 || A5-07-02 || x || x || PIR
 +
|-
 +
| 46 || A5-07-03 || x || x || PIR
 +
|-
 +
| 47 || A5-08-01 ||  ||  ||
 +
|-
 +
| 48 || A5-08-02 ||  ||  ||
 +
|-
 +
| 49 || A5-08-03 ||  ||  ||
 +
|-
 +
| 50 || A5-09-02 ||  ||  ||
 +
|-
 +
| 51 || A5-09-03 ||  ||  ||
 +
|-
 +
| 52 || A5-09-04 ||  ||  ||
 +
|-
 +
| 53 || A5-09-05 ||  ||  ||
 +
|-
 +
| 54 || A5-09-06 ||  ||  ||
 +
|-
 +
| 55 || A5-09-07 ||  ||  ||
 +
|-
 +
| 56 || A5-09-08 ||  ||  ||
 +
|-
 +
| 57 || A5-09-09 ||  ||  ||
 +
|-
 +
| 58 || A5-09-0A ||  ||  ||
 +
|-
 +
| 59 || A5-09-0B ||  ||  ||
 +
|-
 +
| 60 || A5-10-01 ||  ||  ||
 +
|-
 +
| 61 || A5-10-02 ||  ||  ||
 +
|-
 +
| 62 || A5-10-03 ||  ||  ||
 +
|-
 +
| 63 || A5-10-04 ||  ||  ||
 +
|-
 +
| 64 || A5-10-05 ||  ||  ||
 +
|-
 +
| 65 || A5-10-06 ||  ||  ||
 +
|-
 +
| 66 || A5-10-07 ||  ||  ||
 +
|-
 +
| 67 || A5-10-08 ||  ||  ||
 +
|-
 +
| 68 || A5-10-09 ||  ||  ||
 +
|-
 +
| 69 || A5-10-0A ||  ||  ||
 +
|-
 +
| 70 || A5-10-0B ||  ||  ||
 +
|-
 +
| 71 || A5-10-0C ||  ||  ||
 +
|-
 +
| 72 || A5-10-0D ||  ||  ||
 +
|-
 +
| 73 || A5-10-10 ||  ||  ||
 +
|-
 +
| 74 || A5-10-11 ||  ||  ||
 +
|-
 +
| 75 || A5-10-12 ||  ||  ||
 +
|-
 +
| 76 || A5-10-13 ||  ||  ||
 +
|-
 +
| 77 || A5-10-14 ||  ||  ||
 +
|-
 +
| 78 || A5-10-15 ||  ||  ||
 +
|-
 +
| 79 || A5-10-16 ||  ||  ||
 +
|-
 +
| 80 || A5-10-17 ||  ||  ||
 +
|-
 +
| 81 || A5-10-18 ||  ||  ||
 +
|-
 +
| 82 || A5-10-19 ||  ||  ||
 +
|-
 +
| 83 || A5-10-1A ||  ||  ||
 +
|-
 +
| 84 || A5-10-1B ||  ||  ||
 +
|-
 +
| 85 || A5-10-1C ||  ||  ||
 +
|-
 +
| 86 || A5-10-1D ||  ||  ||
 +
|-
 +
| 87 || A5-10-1E ||  ||  ||
 +
|-
 +
| 88 || A5-10-1F ||  ||  ||
 +
|-
 +
| 89 || A5-10-20 ||  ||  ||
 +
|-
 +
| 90 || A5-10-21 ||  ||  ||
 +
|-
 +
| 91 || A5-11-01 ||  ||  ||
 +
|-
 +
| 92 || A5-11-02 ||  ||  ||
 +
|-
 +
| 93 || A5-11-03 ||  ||  ||
 +
|-
 +
| 94 || A5-11-04 ||  ||  ||
 +
|-
 +
| 95 || A5-12-00 ||  ||  ||
 +
|-
 +
| 96 || A5-12-01 ||  ||  ||
 +
|-
 +
| 97 || A5-12-02 ||  ||  ||
 +
|-
 +
| 98 || A5-12-03 ||  ||  ||
 +
|-
 +
| 99 || A5-12-04 ||  ||  ||
 +
|-
 +
| 100 || A5-12-05 ||  ||  ||
 +
|-
 +
| 101 || A5-12-10 ||  ||  ||
 +
|-
 +
| 102 || A5-13-01 ||  ||  ||
 +
|-
 +
| 103 || A5-13-02 ||  ||  ||
 +
|-
 +
| 104 || A5-13-03 ||  ||  ||
 +
|-
 +
| 105 || A5-13-04 ||  ||  ||
 +
|-
 +
| 106 || A5-13-05 ||  ||  ||
 +
|-
 +
| 107 || A5-13-06 ||  ||  ||
 +
|-
 +
| 108 || A5-13-10 ||  ||  ||
 +
|-
 +
| 109 || A5-14-01 ||  ||  ||
 +
|-
 +
| 110 || A5-14-02 ||  ||  ||
 +
|-
 +
| 111 || A5-14-03 ||  ||  ||
 +
|-
 +
| 112 || A5-14-04 ||  ||  ||
 +
|-
 +
| 113 || A5-14-05 ||  ||  ||
 +
|-
 +
| 114 || A5-14-06 ||  ||  ||
 +
|-
 +
| 115 || A5-20-01 ||  ||  ||
 +
|-
 +
| 116 || A5-20-02 ||  ||  ||
 +
|-
 +
| 117 || A5-20-03 ||  ||  ||
 +
|-
 +
| 118 || A5-20-04 ||  ||  ||
 +
|-
 +
| 119 || A5-20-10 ||  ||  ||
 +
|-
 +
| 120 || A5-20-11 ||  ||  ||
 +
|-
 +
| 121 || A5-20-12 ||  ||  ||
 +
|-
 +
| 122 || A5-30-01 ||  ||  ||
 +
|-
 +
| 123 || A5-30-02 ||  ||  ||
 +
|-
 +
| 124 || A5-30-03 ||  ||  ||
 +
|-
 +
| 125 || A5-30-04 ||  ||  ||
 +
|-
 +
| 126 || A5-30-05 ||  ||  ||
 +
|-
 +
| 127 || A5-37-01 ||  ||  ||
 +
|-
 +
| 128 || A5-38-08 ||  ||  ||
 +
|-
 +
| 129 || A5-38-09 ||  ||  ||
 +
|-
 +
| 130 || A5-3F-00 ||  ||  ||
 +
|-
 +
| 131 || A5-3F-7F ||  ||  ||
 +
|-
 +
| 132 || D2-00-01 ||  ||  ||
 +
|-
 +
| 133 || D2-01-00 ||  ||  ||
 +
|-
 +
| 134 || D2-01-01 ||  ||  ||
 +
|-
 +
| 135 || D2-01-02 ||  ||  ||
 +
|-
 +
| 136 || D2-01-03 ||  ||  ||
 +
|-
 +
| 137 || D2-01-04 ||  ||  ||
 +
|-
 +
| 138 || D2-01-05 ||  ||  ||
 +
|-
 +
| 139 || D2-01-06 ||  ||  ||
 +
|-
 +
| 140 || D2-01-07 ||  ||  ||
 +
|-
 +
| 141 || D2-01-08 ||  ||  ||
 +
|-
 +
| 142 || D2-01-09 ||  ||  ||
 +
|-
 +
| 143 || D2-01-0A ||  ||  ||
 +
|-
 +
| 144 || D2-01-0B ||  ||  ||
 +
|-
 +
| 145 || D2-01-0C ||  ||  ||
 +
|-
 +
| 146 || D2-01-0D ||  ||  ||
 +
|-
 +
| 147 || D2-01-0E ||  ||  ||
 +
|-
 +
| 148 || D2-01-0F ||  ||  ||
 +
|-
 +
| 149 || D2-01-10 ||  ||  ||
 +
|-
 +
| 150 || D2-01-11 ||  ||  ||
 +
|-
 +
| 151 || D2-01-12 || x || x || NodOn 2CH Aktor
 +
|-
 +
| 152 || D2-01-13 ||  ||  ||
 +
|-
 +
| 153 || D2-01-14 ||  ||  ||
 +
|-
 +
| 154 || D2-02-00 ||  ||  ||
 +
|-
 +
| 155 || D2-02-01 ||  ||  ||
 +
|-
 +
| 156 || D2-02-02 ||  ||  ||
 +
|-
 +
| 157 || D2-03-00 ||  ||  ||
 +
|-
 +
| 158 || D2-03-01 ||  ||  ||
 +
|-
 +
| 159 || D2-03-02 ||  ||  ||
 +
|-
 +
| 160 || D2-04-00 || x || x || CO2, Hum, Temp
 +
|-
 +
| 161 || D2-04-01 ||  || x ||
 +
|-
 +
| 162 || D2-04-02 ||  || x ||
 +
|-
 +
| 163 || D2-04-03 ||  || x ||
 +
|-
 +
| 164 || D2-04-04 ||  || x ||
 +
|-
 +
| 165 || D2-04-05 ||  || x ||
 +
|-
 +
| 166 || D2-04-06 ||  || x ||
 +
|-
 +
| 167 || D2-04-07 ||  || x ||
 +
|-
 +
| 168 || D2-04-08 ||  || x ||
 +
|-
 +
| 169 || D2-04-09 ||  || x ||
 +
|-
 +
| 170 || D2-04-10 ||  || x ||
 +
|-
 +
| 171 || D2-04-1A ||  || x ||
 +
|-
 +
| 172 || D2-04-1B ||  || x ||
 +
|-
 +
| 173 || D2-04-1C ||  || x ||
 +
|-
 +
| 174 || D2-04-1D ||  || x ||
 +
|-
 +
| 175 || D2-04-1E ||  || x ||
 +
|-
 +
| 176 || D2-05-00 ||  ||  ||
 +
|-
 +
| 177 || D2-05-01 ||  ||  ||
 +
|-
 +
| 178 || D2-05-02 ||  ||  ||
 +
|-
 +
| 179 || D2-06-01 ||  ||  ||
 +
|-
 +
| 180 || D2-10-00 ||  ||  ||
 +
|-
 +
| 181 || D2-10-01 ||  ||  ||
 +
|-
 +
| 182 || D2-10-02 ||  ||  ||
 +
|-
 +
| 183 || D2-11-01 ||  ||  ||
 +
|-
 +
| 184 || D2-11-02 ||  ||  ||
 +
|-
 +
| 185 || D2-11-03 ||  ||  ||
 +
|-
 +
| 186 || D2-11-04 ||  ||  ||
 +
|-
 +
| 187 || D2-11-05 ||  ||  ||
 +
|-
 +
| 188 || D2-11-06 ||  ||  ||
 +
|-
 +
| 189 || D2-11-07 ||  ||  ||
 +
|-
 +
| 190 || D2-11-08 ||  ||  ||
 +
|-
 +
| 191 || D2-20-00 ||  ||  ||
 +
|-
 +
| 192 || D2-20-01 ||  ||  ||
 +
|-
 +
| 193 || D2-20-02 ||  ||  ||
 +
|-
 +
| 194 || D2-30-00 ||  ||  ||
 +
|-
 +
| 195 || D2-30-01 ||  ||  ||
 +
|-
 +
| 196 || D2-30-02 ||  ||  ||
 +
|-
 +
| 197 || D2-30-03 ||  ||  ||
 +
|-
 +
| 198 || D2-30-04 ||  ||  ||
 +
|-
 +
| 199 || D2-30-05 ||  ||  ||
 +
|-
 +
| 200 || D2-30-06 ||  ||  ||
 +
|-
 +
| 201 || D2-31-00 ||  ||  ||
 +
|-
 +
| 202 || D2-31-01 ||  ||  ||
 +
|-
 +
| 203 || D2-32-00 ||  ||  ||
 +
|-
 +
| 204 || D2-32-01 ||  ||  ||
 +
|-
 +
| 205 || D2-32-02 ||  ||  ||
 +
|-
 +
| 206 || D2-33-00 ||  ||  ||
 +
|-
 +
| 207 || D2-34-00 ||  ||  ||
 +
|-
 +
| 208 || D2-34-01 ||  ||  ||
 +
|-
 +
| 209 || D2-34-02 ||  ||  ||
 +
|-
 +
| 210 || D2-40-00 ||  ||  ||
 +
|-
 +
| 211 || D2-40-01 ||  ||  ||
 +
|-
 +
| 212 || D2-50-00 ||  ||  ||
 +
|-
 +
| 213 || D2-50-01 ||  ||  ||
 +
|-
 +
| 214 || D2-50-10 ||  ||  ||
 +
|-
 +
| 215 || D2-50-11 ||  ||  ||
 +
|-
 +
| 216 || D2-A0-01 ||  ||  ||
 +
|-
 +
| 217 || D2-B0-51 ||  ||  ||
 +
|}
 
== User Documentation ==
 
== User Documentation ==
 +
* Get the sketch from the GitHub Source. It comes with an example setup, that allows you to
 +
** Receive telegrams from up to 10 EnOcean button-units ([[EnOcean_Gateway Device RPS simple | EnOceanDevice_RPS_simple.h]])
 +
** Send telegrams as up to 10 Buttons would do, so you can teach your KNX group address (type DPT 1) to any EnOcean Device ([[EnOcean_Gateway Device RPS sender | EnOceanDevice_RPS_sender.h]])
 +
** Update the Status of up to 10 2Ch Nodon Actuators ([[EnOcean_Gateway Device NodOn 2Ch | EnOceanDevice_NodOn_2Ch.h]])
 +
* If needed change the device-configuration, e.g. if you need more or different Device Modules.
 +
** Build the XML File with an XML-Editor of your choice
 +
*** Add the Device Module XML snippets of your choice
 +
*** Take good care of the order of the Device Modules within your XML-File
 +
** Use the KONNEKTING-CodeCreator to create your h-File, matching the XML-File
 +
** Alter the KonnektingEnocean_V1.0.ino file to match the XML-File.
 +
* Upload the code to your Hardware. Refer [[HowToUploadArduinoCode]] if you are struggling with Uploading. Here the device only needs to be connected to your PC via USB, no KNX connection is needed.
 +
** You need the Wire lib and this one: [https://github.com/KONNEKTING/KonnektingDeviceLibrary| KONNEKTING Lib]
 +
* Configure the Gateway, using the Konnekting Suite and the XML-File, refer each Device Modules documentation on how to set the configuration. Some EnOcean device-ids might be needed here, so hold them ready.
 +
* Upload the configuration to the device using the Suite. Now no USB connection is needed but your Hardware needs to be connected KNX instead.
 +
* Now you don't need your PC anymore. Teach in all relevant EnOcean devices. Follow the instructions on each Device Modules page to understand the way each device-type is configured.
  
 
== Developer Documentation ==
 
== Developer Documentation ==
 +
[[EnOcean_Gateway Device Software Template | Refer this on how to build your own EnOcean Device Module]]
  
 
== Build It ==
 
== Build It ==
Line 38: Line 528:
  
 
[[Category:Device/Kits]]
 
[[Category:Device/Kits]]
 +
 +
[https://knx-user-forum.de/forum/projektforen/konnekting/1132413-konnekting-enocean-gateway-alt-etwas-in-die-zukunft-geschaut-coming-soon| KNX User Forum Thread]
 +
 +
[https://www.enocean.com/fileadmin/redaktion/enocean_alliance/pdf/EnOcean_Equipment_Profiles_EEP_V2.6.3_public.pdf| EnOcean Equipment Profiles]

Latest revision as of 21:36, 30 May 2021

EnOcean Gateway
EnOcean Gateway Case close.jpg
Version 1
EnOcean Gateway Case close.jpg
Version 2
EnOcean Gateway Case open.jpg
EnOcean Gateway Case open.jpg
Developer Matthias F.
Status Version 0.9 beta
Microcontroller/Board Cortex M0+ SAMD (Arduino Zero)
KNX connectivity KNX Transceiver on Board
EnOcean Module EnOceanPI
Needed libraries KONNEKTING Lib [1]
Wire (part of Standard Arduino)


Description

Hardware

Software

GiitHub Source Code

Software Components

KonnektingEnocean_V1.0.ino
"Operating System", maps together all components, here the set of devices is configured.
kdevice_KNX_EnOcean_Gateway.h
Derived from the Konnekting configuration XML this header-file defines the available-configuration elements
EEPROM.h
Basic input/output, to access the EEPROM storage that stores the configuration.
EnOcean.h / EnOcean.cpp
Core components, that are shared among the device-modules.
EnOceanDevice_EMPTY.h
Empty EnOcean device template, can be used as a source for copying, to create new Device modules for this Gateway. Feel free to join the development!
EnOceanDevice_NodOn_2Ch.h
Device Module to forward the actuators states from EnOcean to KNX. To allow switching of the actuator from KNX it is neccessary to use a sender module.
EnOceanDevice_RPS_sender.h
Device Module that simulates a simple single EnOcean push-button. Can be used to switch EnOcean actuators. This module can be used independently from any actuator, it is working fire and forget.
EnOceanDevice_RPS_simple.h
Device Module that receives commands from EnOcean push-button devices with up to four rockers.

Software structure

Each Device Module defines the Konnekting representation of a specific device-type. E.g. EnOceanDevice_RPS_simple.h is a module that reflects a standard push-button switches such as Eltako FT-55. If you have two switches, so two FT-55, you need two instances of that Device Module loaded in your Sketch.

Within the "operating system" the devices are registered as objects and within the setup-routine configured. The order of appearance within the setup-routine matters.

How to build the software

Use Arduino with the libraries Wire and KonnektingDevice.

Supported EEP Profiles

ETS* = Sonderversion die direkt in der ETS genutzt werden kann

ID Profil Konnekting ETS* Beschreibung
0 F6-02-01 x x Rocker Switch 2
1 F6-02-02 x x Rocker Switch 2
2 F6-02-03 x
3 F6-02-04 x
4 F6-03-01 x
5 F6-03-02 x
6 F6-04-01
7 F6-04-02
8 F6-05-01
9 F6-10-00 x x Fenstergriff
10 F6-10-01 x x Fenstergriff (ERP2)
11 D5-00-01 x x Fensterkontakt
12 A5-02-01 x
13 A5-02-02 x
14 A5-02-03 x
15 A5-02-04 x
16 A5-02-05 x
17 A5-02-06 x
18 A5-02-07 x
19 A5-02-08 x
20 A5-02-09 x
21 A5-02-0A x
22 A5-02-0B x
23 A5-02-10 x
24 A5-02-11 x
25 A5-02-12 x
26 A5-02-13 x
27 A5-02-14 x
28 A5-02-15 x
29 A5-02-16 x
30 A5-02-17 x
31 A5-02-18 x
32 A5-02-19 x
33 A5-02-1A x
34 A5-02-1B x
35 A5-02-20 x
36 A5-02-30 x
37 A5-04-01 x
38 A5-04-02 x
39 A5-04-03 x
40 A5-05-01
41 A5-06-01 x
42 A5-06-02 x
43 A5-06-03 x
44 A5-07-01 x x PIR
45 A5-07-02 x x PIR
46 A5-07-03 x x PIR
47 A5-08-01
48 A5-08-02
49 A5-08-03
50 A5-09-02
51 A5-09-03
52 A5-09-04
53 A5-09-05
54 A5-09-06
55 A5-09-07
56 A5-09-08
57 A5-09-09
58 A5-09-0A
59 A5-09-0B
60 A5-10-01
61 A5-10-02
62 A5-10-03
63 A5-10-04
64 A5-10-05
65 A5-10-06
66 A5-10-07
67 A5-10-08
68 A5-10-09
69 A5-10-0A
70 A5-10-0B
71 A5-10-0C
72 A5-10-0D
73 A5-10-10
74 A5-10-11
75 A5-10-12
76 A5-10-13
77 A5-10-14
78 A5-10-15
79 A5-10-16
80 A5-10-17
81 A5-10-18
82 A5-10-19
83 A5-10-1A
84 A5-10-1B
85 A5-10-1C
86 A5-10-1D
87 A5-10-1E
88 A5-10-1F
89 A5-10-20
90 A5-10-21
91 A5-11-01
92 A5-11-02
93 A5-11-03
94 A5-11-04
95 A5-12-00
96 A5-12-01
97 A5-12-02
98 A5-12-03
99 A5-12-04
100 A5-12-05
101 A5-12-10
102 A5-13-01
103 A5-13-02
104 A5-13-03
105 A5-13-04
106 A5-13-05
107 A5-13-06
108 A5-13-10
109 A5-14-01
110 A5-14-02
111 A5-14-03
112 A5-14-04
113 A5-14-05
114 A5-14-06
115 A5-20-01
116 A5-20-02
117 A5-20-03
118 A5-20-04
119 A5-20-10
120 A5-20-11
121 A5-20-12
122 A5-30-01
123 A5-30-02
124 A5-30-03
125 A5-30-04
126 A5-30-05
127 A5-37-01
128 A5-38-08
129 A5-38-09
130 A5-3F-00
131 A5-3F-7F
132 D2-00-01
133 D2-01-00
134 D2-01-01
135 D2-01-02
136 D2-01-03
137 D2-01-04
138 D2-01-05
139 D2-01-06
140 D2-01-07
141 D2-01-08
142 D2-01-09
143 D2-01-0A
144 D2-01-0B
145 D2-01-0C
146 D2-01-0D
147 D2-01-0E
148 D2-01-0F
149 D2-01-10
150 D2-01-11
151 D2-01-12 x x NodOn 2CH Aktor
152 D2-01-13
153 D2-01-14
154 D2-02-00
155 D2-02-01
156 D2-02-02
157 D2-03-00
158 D2-03-01
159 D2-03-02
160 D2-04-00 x x CO2, Hum, Temp
161 D2-04-01 x
162 D2-04-02 x
163 D2-04-03 x
164 D2-04-04 x
165 D2-04-05 x
166 D2-04-06 x
167 D2-04-07 x
168 D2-04-08 x
169 D2-04-09 x
170 D2-04-10 x
171 D2-04-1A x
172 D2-04-1B x
173 D2-04-1C x
174 D2-04-1D x
175 D2-04-1E x
176 D2-05-00
177 D2-05-01
178 D2-05-02
179 D2-06-01
180 D2-10-00
181 D2-10-01
182 D2-10-02
183 D2-11-01
184 D2-11-02
185 D2-11-03
186 D2-11-04
187 D2-11-05
188 D2-11-06
189 D2-11-07
190 D2-11-08
191 D2-20-00
192 D2-20-01
193 D2-20-02
194 D2-30-00
195 D2-30-01
196 D2-30-02
197 D2-30-03
198 D2-30-04
199 D2-30-05
200 D2-30-06
201 D2-31-00
202 D2-31-01
203 D2-32-00
204 D2-32-01
205 D2-32-02
206 D2-33-00
207 D2-34-00
208 D2-34-01
209 D2-34-02
210 D2-40-00
211 D2-40-01
212 D2-50-00
213 D2-50-01
214 D2-50-10
215 D2-50-11
216 D2-A0-01
217 D2-B0-51

User Documentation

  • Get the sketch from the GitHub Source. It comes with an example setup, that allows you to
  • If needed change the device-configuration, e.g. if you need more or different Device Modules.
    • Build the XML File with an XML-Editor of your choice
      • Add the Device Module XML snippets of your choice
      • Take good care of the order of the Device Modules within your XML-File
    • Use the KONNEKTING-CodeCreator to create your h-File, matching the XML-File
    • Alter the KonnektingEnocean_V1.0.ino file to match the XML-File.
  • Upload the code to your Hardware. Refer HowToUploadArduinoCode if you are struggling with Uploading. Here the device only needs to be connected to your PC via USB, no KNX connection is needed.
  • Configure the Gateway, using the Konnekting Suite and the XML-File, refer each Device Modules documentation on how to set the configuration. Some EnOcean device-ids might be needed here, so hold them ready.
  • Upload the configuration to the device using the Suite. Now no USB connection is needed but your Hardware needs to be connected KNX instead.
  • Now you don't need your PC anymore. Teach in all relevant EnOcean devices. Follow the instructions on each Device Modules page to understand the way each device-type is configured.

Developer Documentation

Refer this on how to build your own EnOcean Device Module

Build It

Links

KNX User Forum Thread

EnOcean Equipment Profiles

Retrieved from "http://wiki.konnekting.de/index.php?title=EnOcean_Gateway&oldid=941"